|
Product
|
Backing Material
|
Total Caliper (mils)
|
Adhesive Type
|
Specs
|
Description
|
|
1
|
Epoxy Film
|
3.5
|
Acrylic
|
UL
|
Excellent handling properties, high dielectric strength, solvent and flagging resistant; for use as an outer wrap on wrap and fill capacitors, coil cover, interlayer insulation and wire harness. Printable.
|
|
10
|
Epoxy Film
|
5
|
Rubber
|
UL
|
Thermosetting, flame retardant, no liner. Tough, conformable, resistant to solder damage, puncture resistant, good electrical properties, good handling properties. For use as coil cover, anchor, harnessing, banding and as core, layer and crossover insulation.
|
|
1093
|
Polymide Film
|
2.5
|
Silicone
|
UL
|
|
|
1120
|
Aluminum foil
|
4
|
Acrylic conductive
|
UL
|
For EMI sheilding, static charge draining, grounding. Good for cable wrap. Easily die-cut.
|
|
1125
|
Copper Foil
|
3.5
|
Acrylic nonconductive
|
UL
|
For EMI shielding on a wide range of electronic applications. Easily die-cut.
|
|
1126
|
Copper Foil
|
3.5
|
Acrylic conductive
|
MIL
|
For EMI shielding, static charge draining when grounded. Easily die-cut.
|
|
1170
|
Aluminum foil
|
3.2
|
Acrylic conductive
|
UL
|
For EMI sheilding, static charge draining, grounding. Solderable and easily die-cut
|
|
1181
|
Copper Foil
|
2.6
|
Acrylic conductive
|
UL
|
For EMI shielding, static charge draining, grounding. Easily die-cut.
|
|
1182
|
Copper Foil
|
3.5
|
Acrylic conductive - both sides
|
UL
|
Typically used to bond two surfaces, both physically and electrically. Also can provide EMI shielding, static charge draining, gounding. Easily die-cut.
|
|
1183
|
Copper Foil
|
2.6
|
Acrylic conductive
|
UL
|
Oxidation resistant for long-term EMI shielding, static charge draining, grounding. Solderable and easily die-cut.
|
|
1194
|
Copper Foil
|
2.6
|
Acrylic nonconductive
|
UL
|
For EMI shielding, static charge draining, grounding. Easily die-cut.
|
|
12
|
Paper
|
5.5
|
Rubber
|
|
For banding coils and for cover on bobbin-wound coils.
|
|
1205
|
Polymide Film
|
3
|
Acrylic
|
UL
|
Solvent-resistant, tough, thin, puncture-resistant film designed for high-temperature applications. Good cover layer for flexible circuits and for insulating applications.
|
|
1206
|
Polymide Film
|
2.2
|
Acrylic
|
UL
|
|
|
1245
|
Copper Foil
|
4
|
Acrylic nonconductive
|
UL
|
For EMI shielding, static charge draining, grounding, solderable and easily die-cut.
|
|
1267
|
Aluminum foil
|
5
|
Acrylic nonconductive
|
UL
|
For EMI sheilding, static charge draining, grounding. Solderable and easily die-cut
|
|
1276
|
Polyester Film/Filament reinforced
|
9
|
Acrylic
|
|
Solvent-resistant, high shear strength adhesive. Good tensile strength for holding in oil-filled transformer applications.
|
|
1318-1
|
Polyester Film
|
2.5
|
Acrylic
|
UL
|
1-mil film; excellent flagging and solvent resistance. For use as an outer wrap on capacitors and coils; printable. Available in yellow, white and black.
|
|
1318-2
|
Polyester Film
|
3.3
|
Acrylic
|
UL
|
Same as 1318-1 but with 2-mil film.
|
|
1339
|
Polyester Film/Filament reinforced
|
6.5
|
Acrylic
|
UL
|
Solvent-resistant, high shear strength adhesive. Good tensile strength and edge-tear resistance; for holding applications.
|
|
1345
|
Copper Foil
|
4
|
Acrylic nonconductive
|
UL
|
Embossed tin-plated copper foil. Oxidation resistant for long term EMI shielding, static charge draining, grounding.
|
|
1350F-1
|
Polyester Film
|
2.5
|
Acrylic
|
UL
|
1-mil film with flame retardant adhesive. Excellent flagging and solvent resistance. For use as an outer wrap on capacitors and coils; printable. Available in yellow, white and black.
|
|
1350F-2
|
Polyester Film
|
3.3
|
Acrylic
|
UL
|
Same as 1350-1 but with 2-mil film.
|
|
1350T-1
|
Polyester Film
|
3
|
Acrylic
|
UL
|
1.5-mil, triple-layer, ppolyester film with flame retardant acrylic adhesive. Excellent flagging and solvent resistance, with good wet grab and smooth, even unwind for use on automated equipment.
|
|
1351-1
|
Polyester Film
|
2.5
|
Acrylic
|
UL
|
1-mil film with flame-reatrdant acrylic adhesive. Excellent flagging and solvent resistance. For use as inner layer and outer wrap insulation on coils. Smooth, even unwindfor use on automatic equipment. Available in yellow and white.
|
|
1351-2
|
Polyester Film
|
3
|
Acrylic
|
UL
|
Same as 1351-1 but with 2-mil film.
|
|
1351T-1
|
Polyester Film
|
3
|
Acrylic
|
UL
|
Same as 1350T-1 but available in yellow and white.
|
|
1380
|
Magnetic/Polymer Film
|
11.8
|
Rubber
|
|
Ecellent high magnetic shielding at low frequency. Soft magnetic sheet sandwiched bewteen layers of film. Thin, flexible, lightweight and easily die-cut.
|
|
16
|
Paper
|
9
|
Rubber
|
|
Conformable; for use as coil cover on bobbin-wound coils.
|
|
1710
|
Vinyl
|
7
|
Rubber
|
UL
|
Good quality, economical general purpose insulating tape. Good resistance to abrasion, moisture, alkalis, acid, copper corrosion and varying weather conditions.
|
|
20
|
Epoxy Film
|
5
|
Acrylic
|
UL
|
Reinforced, white acrylic adhesive, flame retardant, no liner, printable.
|
|
2191FR
|
Metallized Cloth
|
5.5
|
Acrylic conductive
|
UL
|
Lightweight, conformable, oxidation resistant and high strength for EMI shielding and grounding. Easily die-cut.
|
|
22
|
Vinyl
|
10
|
Rubber
|
UL
|
Heavy-duty insulation designed for general purpose use where greater mechanical strength and abrasion resistance are required.
|
|
2245
|
Copper Foil
|
4
|
Acrylic nonconductive
|
|
Same as 1245
|
|
27
|
Glass Cloth
|
7
|
Rubber
|
UL
|
Rubber adhesive, thermosetting, printable, no liner. Edge tear resistant, conformable, abrasion resistant.
|
|
3245
|
Copper Foil
|
5.9
|
Acrylic conductive
|
UL
|
Reverse embossed. For EMI shielding, static charge draining, grounding. Solderable and easily die-cut.
|
|
33
|
Vinyl
|
7
|
Rubber
|
UL
|
Provides moisture-tight electrical and mechanical protection; good resistance to abrasion, moisture, alkalis, acids and varying weather conditions.
|
|
33+
|
Vinyl
|
7
|
Rubber
|
UL
|
All-weather vinyl insulating tape; conformable for cold weatherapplications. Excellent resistance to abrasion, moisture, alkalis, acids, UV rays and weather. Thicker for quicker buildup.
|
|
35
|
Vinyl
|
7
|
Rubber
|
UL
|
Color-coding tape available in 9 fade-resistant colors. Abrasion and weather resistant. For use in phase identification, color-coding leads and piping systems, and for marking safety areas. Resistant to moisture, alkalis, acids and copper corrosion.
|
|
40CL
|
Anti-Static Films
|
2.2
|
Antistatic polymer conductive
|
|
General use utility tape for electronic components and assemblies, 1-mil clear polyester film backing.
|
|
40PR
|
Anti-Static Films
|
2.2
|
Antistatic polymer conductive
|
|
General use utility tape for electronic components and assemblies, 1-mil clear polyester film backing with preprinted static symbol.
|
|
44
|
Polyester Film
|
5.5
|
Rubber
|
UL
|
Reinforced mat, rubber adhesive. Thermosetting, no liner.
|
|
46
|
Polyester Film/Filament reinforced
|
7
|
Rubber
|
UL
|
Good tensile strength and edge tear resistance. For use in end-turn taping.
|
|
5
|
Polyester Film
|
2.5
|
Acrylic
|
UL
|
Clear, acrylic adhesive, no liner. Solvent-resistant for use in coil and capacitor holding applications.
|
|
54
|
Polyester Film
|
2.5
|
Rubber
|
UL
|
Rubber adhesive, thermosetting, no liner. Used in fine wire coils where magnet wire serves to color code.
|
|
55
|
Polyester Film
|
7.5
|
Rubber
|
UL
|
Thermosetting, no liner. Edge tear, puncture and abrasion resistant for use as a coil cover, lead pad and core, layer and crossover insulation.
|
|
56
|
Polyester Film
|
2.3
|
Rubber
|
UL
|
Thermosetting, no liner. For use as layer insulation and coil cover in 130F applications.
|
|
57
|
Polyester Film
|
3.3
|
Rubber
|
UL
|
Thermosetting, no liner. Use as a coil cover, layer insulation and capacitor wrap where higher electrical strength is desirable.
|
|
58
|
Polyester Film
|
3.3
|
Rubber
|
UL
|
Use as a coil cover, layer insulation and capacitor wrap where higher electrical strength is desirable.
|
|
60
|
PTFE Film
|
4
|
Silicone
|
UL
|
Thermosetting, no liner. Use on high temperature coils, capacitors and wire harnesses.
|
|
61
|
PTFE Film
|
7
|
Silicone
|
UL
|
Thicker version of 60
|
|
62
|
PTFE Film
|
4
|
Silicone
|
UL
|
Thermosetting, printable. Better bonding of resisns and varnishes.
|
|
63
|
PTFE Film
|
3.5
|
Acrylic
|
UL
|
Solvent-resistant adhesive for use where chemical properties are more important than temperature resistance. No liner.
|
|
69
|
Glass Cloth
|
7
|
Silicone
|
UL
|
Silicone adhesive, thermosetting, printable, no liner. Edge tear resistant, conformable, high temp flame retardant adhesive.
|
|
74
|
Polyester Film
|
0.8
|
Rubber
|
UL
|
Conformable. Provides good electrical strength for coil applications where space is at a premium.
|
|
75
|
Polyester Film
|
3.8
|
Rubber
|
UL
|
Thermosetting, linered. For use in bonding applications requiring a positive insulation barrier.
|
|
79
|
Glass Cloth
|
7
|
Acrylic
|
|
Edge tear resistant, conformable, solvent-resistant. For use as coil cover, anchor, and as core, layer and crossover insulation. Printable.
|
|
88
|
Vinyl
|
7
|
Rubber
|
UL
|
All-weather vinyl insulating tape. Conformable for cold weather applications. Excellent resistance to abrasion, moisture, alkalis, acids, and copper corrosion.
|
|
92
|
Polymide Film
|
3
|
Silicone
|
UL
|
Tough, thin, puncture-resistant film designed for high temperature application. For insulating and motor applications.
|
|
AB2020
|
Absorbing Materials
|
0.27
|
Acrylic
|
|
Silicone rubber with magnetic filler. EMI absorbing can supress radiated noise in broadband frequency.
|
|
AB2025
|
Absorbing Materials
|
0.32
|
Acrylic
|
|
Silicone rubber with magnetic filler. EMI absorbing can supress radiated noise in broadband frequency.
|
|
AB2050
|
Absorbing Materials
|
0.58
|
Acrylic
|
|
Silicone rubber with magnetic filler. EMI absorbing can supress radiated noise in broadband frequency.
|
|
AB2080
|
Absorbing Materials
|
0.88
|
Acrylic
|
|
Silicone rubber with magnetic filler. EMI absorbing can supress radiated noise in broadband frequency.
|
|
AB2100
|
Absorbing Materials
|
1.08
|
Acrylic
|
|
Silicone rubber with magnetic filler. EMI absorbing can supress radiated noise in broadband frequency.
|
|
AB2120
|
Absorbing Materials
|
1.28
|
Acrylic
|
|
Silicone rubber with magnetic filler. EMI absorbing can supress radiated noise in broadband frequency.
|
|
AB2150
|
Absorbing Materials
|
1.58
|
Acrylic
|
|
Silicone rubber with magnetic filler. EMI absorbing can supress radiated noise in broadband frequency.
|
|
AG-2300
|
Metallized Cloth
|
4.3
|
Acrylic conductive
|
|
Same as 2191FR.
|
|
AL-1010S
|
Epoxy Film/Aluminum Foil
|
13.8
|
none
|
UL
|
Same as AL-10S
|
|
AL-10S
|
Epoxy Film/Aluminum Foil
|
7.8
|
none
|
UL
|
Softened aluminum foil with flame retardant film on one side. Excellent EMI shielding for PCBs and assemblies. Lightweight, flexible and easily die-cut.
|
|
AL-25BT
|
Aluminum foil
|
2.4
|
Acrylic conductive
|
UL
|
For EMI sheilding, static charge draining, grounding. Solderable and easily die-cut
|
|
AL-25DC
|
Aluminum foil
|
3.3
|
Acrylic conductive- both sides
|
UL
|
|
|
AL-35FR
|
Aluminum foil/Polyester film
|
2.4
|
Acrylic conductive
|
UL
|
Foil backing laminated with polyester film. Solvents and oils. Easily die-cut. Good resistance to oxidation.
|
|
AL-36FR
|
Aluminum foil/Polyester film
|
2.4
|
Acrylic condictive
|
UL
|
Same as AL-35FR
|
|
AL-36NC
|
Aluminum foil/Polyester film
|
2.2
|
Acrylic nonconductive
|
|
Same as AL-35FR
|
|
Al-37BLK
|
Aluminum foil/Polyester film
|
2.8
|
Acrylic conductive
|
UL
|
Foil backing laminated with polyester film. Matte surface finish. Good electrical insulation, resistance to oxidation, solvents and oils. Easily die-cut.
|
|
AL-40BLK
|
Aluminum foil/Polyester film
|
2.8
|
Acrylic conductive
|
UL
|
Same as AL-37BLK with glossy surface finish.
|
|
AL-50BT
|
Aluminum foil
|
3.1
|
Acrylic conductive
|
UL
|
|
|
AU-2190
|
Metallized Cloth
|
4.3
|
Acrylic conductive
|
|
Same as 2191FR.
|
|
CN-3190
|
Metallized Cloth
|
7
|
Acrylic conductive
|
|
Same as 2191FR.
|
|
CU-1010S
|
Epoxy Film/Copper Foil
|
11.8
|
none
|
|
|
|
CU-10S
|
Epoxy Film/Copper Foil
|
6.7
|
none
|
UL
|
Softened copper foil with flame retardant film on one side. Excellent EMI shielding for PCBs and assemblies. Lightweight, flexible and easily die-cut.
|
|
DS-10
|
Mesh and Sleeving
|
10
|
None
|
|
EMI mesh sleeves for cables and harnesses. Excellent strain relief and heat stability, flexible, oxidation resistant. Solderable.
|
|
DS-14
|
Mesh and Sleeving
|
14
|
None
|
|
EMI mesh sleeves for cables and harnesses. Excellent strain relief and heat stability, flexible, oxidation resistant. Solderable.
|
|
DS-5
|
Mesh and Sleeving
|
5
|
None
|
UL
|
EMI mesh sleeves for cables and harnesses. Excellent strain relief and heat stability, flexible, oxidation resistant. Solderable.
|
|
DS-7
|
Mesh and Sleeving
|
7
|
None
|
|
EMI mesh sleeves for cables and harnesses. Excellent strain relief and heat stability, flexible, oxidation resistant. Solderable.
|
|
DS-ME
|
Mesh and Sleeving
|
5
|
None
|
|
EMI mesh sleeves for cables and harnesses. Excellent strain relief and heat stability, flexible, oxidation resistant. Solderable.
|
|
DS-MG
|
Mesh and Sleeving
|
7
|
None
|
|
EMI mesh sleeves for cables and harnesses. Excellent strain relief and heat stability, flexible, oxidation resistant. Solderable.
|
|
DS-MJ
|
Mesh and Sleeving
|
10
|
None
|
|
EMI mesh sleeves for cables and harnesses. Excellent strain relief and heat stability, flexible, oxidation resistant. Solderable.
|
|
DS-MN
|
Mesh and Sleeving
|
14
|
None
|
|
EMI mesh sleeves for cables and harnesses. Excellent strain relief and heat stability, flexible, oxidation resistant. Solderable.
|
|
FS-30
|
Mesh and Sleeving
|
30
|
None
|
|
EMI mesh sleeves for cables and harnesses. Excellent strain relief and heat stability, flexible, oxidation resistant. Solderable.
|
|
FS-37
|
Mesh and Sleeving
|
37
|
None
|
|
EMI mesh sleeves for cables and harnesses. Excellent strain relief and heat stability, flexible, oxidation resistant. Solderable.
|
|
FS-D30
|
Mesh and Sleeving
|
30
|
None
|
|
EMI mesh sleeves for cables and harnesses. Excellent strain relief and heat stability, flexible, oxidation resistant. Solderable.
|
|
FS-D37
|
Mesh and Sleeving
|
37
|
None
|
|
EMI mesh sleeves for cables and harnesses. Excellent strain relief and heat stability, flexible, oxidation resistant. Solderable.
|
|
X-7001
|
Metallized Cloth
|
4.3
|
Acrylic conductive
|
|
Typically used to bond two surfaces physically and electrically. Can also provide EMI shielding, static charge draining and grounding.
|
